GoMax HDMI/DVI/YPbPr over CAT5e Series Start Price USD 899.00 Current Price USD 899.00 Time Left - Bid Count 0 Buy It Now Price - Reserve Price - Start Time Monday, July 07, 2008 End Time Thursday, July 17, 2008 Location Hsinchu See more about 'GoMax HDMI/DVI/YPbPr over CAT5e Series' Description GoMax HDMI / DVI / YPbPr over CAT5e Series   GoMax Video over CAT5e Series provides the economic way to split, convert, or extend signals by using the low-cost CAT5 / 5e cables. With CAT5 / 5e cables, CV-57B, CV-57C, CV-117, CV-17, and CV-07 are capable of extending HDMI, DVI, or YPbPr sources from PS3, PC or DVD Player cost-effectively.  The HDMI CAT5e Distribution Series (SP-5012, SP-5022, SP-5018, CV-715, and CV-715s) provides such a flexible solution that high definition video and high quality audio can be transmitted to different locations over a long distance. PLEASE EXPLORE US AT http://www.gomax-electronics.com.tw/ NOTICE!! The contents of the package vary from time to time. For this bidding, the whole package includes CV-57B*1pcs, CV-117*2pcs, CV-17*1pcs, SP-5012*1pcs, SP-5022*1pcs, SP-5018*1pcs, CV-715*4pcs and CV-715s*6pcs. Other products are not available for the time being. CV-57B/HDMI Extender over 1 CAT5e Cable DESCRIPTION           The CV-57B boosts up your video/audio transmission distance up to 60m/200ft in HDTV 1080i format. With only one cost effective CAT-5/5e cable, users can readily extend HDTV sources from DVD players, PS3, PC, and any other kinds of sources compliant with TMDS to distant display monitors including HDMI/DVI enabled TV sets or LCD PC monitors. This cost effective flexibility makes HDCP compliant DVD players or PS3 transmit high quality video and audio with a greater distance at the minimal cost, when integrating several components apart.   The CV-57B includes two units: transmitting (CV-517) and receiving (CV-715) units. The transmitting unit is used to capture the input HDMI/DVI signals and carry the signals through one RJ-45 connector into one cost effective CAT-5/5e/6 cable. The receiving unit is responsible for equalizing the sent TMDS multimedia data. The transmission distance between the sending and receiving units can be up to 60m/200ft at 1080i and 40m/130ft at 1080p. With equalization control switch on the receiving unit, users can adjust the equalization strength to the received TMDS signals, and therefore optimize the transmission distance between source and destination.   FEATURES   l   HDMI 1.2a compliant l   Extend the transmission distance up to 60m/200ft from the sources at 1080i or 720p l   Extend the transmission distance up to 40m/130ft from the sources at 1080p l   HDCP compliant l   Minimize the cable skew by adjustable 8-level equalization knob   SPECIFICATIONS   l   Video Bandwidth: 1.65Gbps (HDMI 1.2a) l   Input TMDS signal: 1.2 volts (peak-to-peak) l   Input DDC signal: 5 volts (peak-to-peak) l   HDMI Connector: 19 pin type female connector l   Power Supply: 5V 2A l   Power Consumption: 10 Watts (max) l   RJ-45 Connector: 2 indication LEDs l   Dimensions: 70mm x 60mm x 25mm / 2.8”x2.4”x1” (L x W x H) l   Weight: 180g / 6.3oz   PACKAGE CONTENTS   l   1x HDMI transmitting unit (CV-57B-T) l   1x HDMI receiving unit (CV-57B-R) l   2x worldwide adapter l   1x user manual   CV-57C/HDMI Extender over 2 CAT5e Cable with IR DESCRIPTION   The CV-57C HDMI Extender over 2 CAT5e Cables with IR boosts up your video/audio transmission distance up to 60m / 200ft in HDTV 720p/1080i format. With two low cost CAT-5/5e/6 cables, users can readily extend HDTV sources from DVD players, Blu-ray Disc Player, PS3, PC, and any other kinds of sources compliant with TMDS to distant display monitors including HDMI/DVI enabled TV sets or LCD PC monitors. This cost effective flexibility makes HDCP compliant DVD players or PS3 transmit high quality video and audio with a greater distance at the minimal cost, when integrating several components apart. In addition, with the embedded infrared (IR) receiving and transmitting units to facilitate the control path, users can enjoy high quality audio/video and control the HDMI sources from the remote site instantly.   The CV-57C includes two units: CV-57C-T as the transmitting unit and CV-57C-R as the receiving unit. The transmitting unit is used to transfer the HDMI/DVI and IR signals input and carry the signals through two RJ-45 connectors over two low cost CAT-5/5e/6 cables. The receiving unit is responsible for equalizing transferred TMDS multimedia data and re-sending IR signals. The transmission distance between the sending and receiving units can be up to 60m / 200ft at 720p/1080i and 40m / 130ft at 1080p. With equalization control knob on the receiving unit, users can adjust the equalization scale to the received TMDS signals, and therefore optimize the transmission distance between source and destination.   FEATURES   l   HDMI 1.3a compliant l   Extend the transmission distance up to 60m / 200ft from the sources at 1080i or 720p l   Extend the transmission distance up to 40m / 130ft from the sources at 1080p l   Provides independent DDC channel, fully HDCP compliant l   Minimizes the cable skew by adjustable 8-level equalization knob l   Embedded IR control path   SPECIFICATIONS   l   Video Bandwidth: 10.2 Gbps (HDMI 1.3a) l   Input connector:    Transmitter: 1x female HDMI connector (19 pin type)    Receiver: 2x RJ-45    IR Socket:     Electro-optical Characteristics: (Ta=25°C) Symbol Parameter TYP. UNIT fo. B.P.F Center Frequency 38 KHz l   Output connector:    Transmitter: 2x RJ-45    Receiver: 1x female HDMI connector (19 pin type)    IR Socket:     Electro-optical Characteristics: (Ta=25°C) Symbol Parameter TYP. UNIT fo. B.P.F Center Frequency 38 KHz l   Input TMDS signal: 1.2 volts (peak-to-peak) l   Input DDC signal: 5 volts (peak-to-peak) l   HDMI Connector: 19 pin type female connector l   Power Supply: 5V 4A DC l   Power Consumption: 6 Watts (max) l   RJ-45 Connector: 2 indication LEDs l   Dimensions: 85mm x 60mm x 25mm / 3.3”x2.4”x1” (L x W x H) l   Weight: 240g / 8.5oz   PACKAGE CONTENTS   l   1x HDMI transmitting unit (CV-57C-T) l   1x HDMI receiving unit (CV-57C-R) l   1x 5V 4A power adapter l   1x user manual   CV-117/DVI over CAT5e Mini-Extender DESCRIPTION   The CV-117 extends your PC DVI transmission distance up to 30m/100ft with resolution 1024x768 @60Hz. With CV-117, users can transmit high quality digital video of PC applications through one cost effective CAT-5/5e to the remote monitor or projector, instead of using short and expensive DVI cables. With embedded EDID inside the extender, your PC will continue to send the digital video even when the monitor is not connected. The user can then disconnects the monitor, place it in a remote location and reconnect it without rebooting the operating system. The CV-117 includes two identical units: transmitting and receiving units. The transmitting unit is connected to your PC DVI output and the receiving unit is connected to the monitor. While successfully connected, the two LED lights on RJ-45 connector will blink. The transmission distance between the sending and receiving units can be up to 30m/100ft at XGA (1024x768 @60Hz) or 15m/50ft at UXGA (1600x1200 @60Hz). With compact size and requiring no power, CV-117 is the most cost effective choice for bringing your impressive digital video to the remote display.   FEATURES   l   DVI 1.1 compliant l   Handy DVI-D to RJ-45 Adaptor with programmable EDID feature l   Extend the transmission distance from the sources up to 30m/100ft at XGA (1024x768 @60Hz) or 15m/50ft at UXGA (1600x1200 @60Hz) l   Identical units work at both transmitting and receiving end. Easy to install. l   LED indicators l   Compact size   SPECIFICATIONS   l   Video Bandwidth: 1.65 Gbps (DVI 1.1) l   Input TMDS signal: 1.2 volts (peak-to-peak) l   Input DDC signal: 5 volts (peak-to-peak) l   DVI-D Connector (digital only) l   RJ-45 Connector: 2 indication LEDs l   Dimensions: 50mm x 40mm x 20mm / 2”x1.6”x0.8” (L x W x H) l   Weight: 44g / 1.6oz   PACKAGE CONTENTS   l   2x CV-117 (TX: transmitting unit and RX: receiving unit) l   1x user manual CV-17/DVI over CAT5e Extender DESCRIPTION   The CV-17 extends your PC DVI transmission distance up to 60m/200ft with resolution 1024x768 @60Hz. With CV-17, users can transmit high quality digital video of PC applications through one cost effective CAT-5/5e to the remote monitor or projector, instead of using short and expensive DVI cables. With embedded EDID inside the adapter, your PC will continue to send the digital video even when the monitor is not connected. The user can then disconnects the monitor, place it in a remote location and reconnect it without rebooting the operating system. The CV-17 includes two units: transmitting and receiving units. The transmitting unit is connected to your PC DVI output and the receiving unit is connected to the monitor. While successfully connected, the two LED lights on RJ-45 connector will blink. The transmission distance between the sending and receiving units can be up to 60m/200ft at XGA (1024x768) and 30m/100ft at UXGA (1600x1200). With compact size, CV-17 is the most cost effective choice for bringing your impressive digital video to the remote display.   FEATURES   l   DVI 1.1 compliant l   Handy DVI-D to RJ-45 Adaptor with programmable EDID feature l   Extends the transmission distance from the sources up to 60m/200ft at XGA (1024x768@60Hz) and 30m/100ft at UXGA (1600x1200@60Hz) l   Minimize the cable skew by adjustable 8-level equalization knob l   Supports 1080i/1080p HDTV resolutions & VESA standards l   Receiving unit can learn EDID information for DVI/HDMI enabled display device   SPECIFICATIONS   l   Video Bandwidth: 1.65 Gbps (DVI 1.1) l   Input TMDS signal: 1.2 volts (peak-to-peak) l   Input DDC signal: 5 volts (peak-to-peak) l   DVI-D Connector (digital only) l   RJ-45 Connector: 2 indication LEDs l   Dimensions: 70mm x 60mm x 25mm / 2.8"x2.4"x1" (L x W x H) l   Weight: 119g / 4.2oz   PACKAGE CONTENTS   l   1x CV-117 DVI CAT5e Mini-Transmitter l   1x CV-711 DVI CAT5e Receiver l   1x worldwide adapter l   1x user manual   CV-07/YPbPr/Composite over CAT5e Extender with Audio DESCRIPTION   With only one CAT-5e cable, the CV-07 lets you extend signals to cover the distance up to 500m / 1,650ft. The devices are composed of a transmitter and a receiver. The transmitter is installed near the video signal source, and the receiver is placed near the desired display, up to impressive 500m / 1,650ft away for composite case or YPbPr case in 480i / 480p with digital audio to 400m / 1,300ft away. For composite case, you can send your video with analog stereo audio signal, and for YPbPr case, digital audio in S/PDIF format can be sent through a cost-effective CAT-5e cable.   FEATURES   l   Extend CVBS with analog audio to 500m / 1,650ft l   Extend YPbPr in 480i / 480p to 500m / 1,650ft with digital audio to 400m / 1,300ft l   Extend YPbPr in 720p with digital audio to 300m / 1,000ft l   Adjustable EQ & Gain control on the receiver side to adapt the module to the quality of cable and video.   SPECIFICATIONS   l   YPbPr Format Support: 480i, 480p, 720p, and 1080i l   CVBS: NTSC / PAL / SECAM l   Input DDC signal: 5 volts (peak-to-peak) l   HDMI Connector: 19 pin type female connector l   Power Supply: 5V 2A l   Power Consumption: TX: 5 Watts (max), RX: 8 Watts (max) l   RJ-45 Connector: 2 indication LEDs l   Dimensions: 123mm x 95mm x 25mm / 4.8”x3.7”x1” (L x W x H) l   Weight: 400g / 14oz   PACKAGE CONTENTS   l   1x CV-017 (TX: transmitting unit) l   1x CV-710 (RX: receiving unit) l   2x worldwide adapter l   1x user manual   SP-1002A/3-port DVI Splitter with 1-port over CAT5e DESCRIPTION   The SP-1002A receives and reconstructs (equalizing & re-clocking) a DVI signal and distributes it to two identical DVI outputs and one RJ45 output. With the DVI over CAT5e Mini-Extender (CV-117), the third output can carry DVI signal through CAT5e cable over 30m / 100ft at 1024x768. The DVI splitter can be perfectly cascaded with one another in order to obtain more DVI outputs (at least 6 tiers). Each output can be turned on/off individually through an IR remote control. It will also process (read & store) the EDID information sent over the Data Display Channel (DDC).   FEATURES   l   Connects a DVI video source to 3 DVI compatible displays l   Perfectly acts as a DVI extender with the DVI over CAT5e Mini-Extender (CV-117) l   Extends DVI signal by low cost CAT5e cable up to 30m / 100ft l   Stackable, 6 devices stacked can support up to 13 outputs l   IR remote control allows switching outputs (optional) l   Reads and remembers the EDID of displays l   Once stacked/cascaded, machine IDs can be assigned l   Maintain highest video resolution (1600x1200) l   Support DDWG standard for DVI compliant monitors l   Can be modified EQ with two modes   SPECIFICATIONS   l   Input connector: 1x DVI-I l   Output connector: 2x DVI-I & 1x RJ45 l   Maximum Resolution: 1600 x 1200 l   LEDs:1x Green (ID) & 1x Red (Power) l   DIP switch: 2 l   Power Supply: 5V DC l   Dimensions: 120mm x 95mm x 23mm / 4.7"x3.7"x0.9" (L x W x H) l   Weight: 280g / 9.8oz   PACKAGE CONTENTS   l   1x SP-1002A l   1x CV-117 DVI over CAT5e Mini-Extender l   1x worldwide adapter l   1x user manual   HDMI over CAT5e Distribution Series (SP-5012/HDMI over CAT5e Transmitter SP-5022/HDMI over CAT5e Transceiver SP-5018/HDMI over CAT5e 8-port Transmitter CV-715s/HDMI over CAT5e Mini-Receiver CV-715/HDMI over CAT5e Receiver) DESCRIPTION   The HDMI over CAT5e Distribution Series provides the most flexible solution by which the high definition video and high quality audio can be transmitted to different locations over a long distance. The devices are cascadable, allowing you to extend HDMI/DVI compliant displays almost anywhere.   FEATURES   l   HDMI 1.2a compliant l   HDCP compliant l   Allows unlimited cascading l   Regenerates the HDMI signal l   Supports audio output l   Supports default HDMI EDID and record the EDID of displays l   Extends up to 15m / 50ft of input HDMI cable l   Extends up to 15m / 50ft of output HDMI cable l   Extends up to 60m / 200ft (1080i) of output CAT5e cable l   Extends up to 40m / 130ft (1080p) of output CAT5e cable l   Easy installation   SPECIFICATIONS AND PACKAGE CONTENTS   Model Name CV-715s SP-5012 SP-5022 Package Contents 1x CV-715s 1x SP-5012 1x 5V power adapter 1 x User Manual 1x SP-5022 1x 5V power adapter 1 x User Manual Video Bandwidth 1.65Gbps 1.65Gbps 1.65Gbps Input 1x RJ45 1x HDMI 1x RJ45 Output 1x HDMI 1x HDMI, 1x RJ45 1x 3.5mm audio socket 1x HDMI, 1x RJ45 1x 3.5mm audio socket Power None 5V DC 5V DC HDMI Connector 19 pin type female connector 19 pin type female connector 19 pin type female connector RJ-45 Connector 2 indication LEDs 2 indication LEDs 2 indication LEDs Dimensions 45mm x 25mm x 20mm / 1.8”x1”x0.8” (L x W x H) 180mm x 108mm x 27mm / 7”x4.3”x1.1” (L x W x H) 180mm x 108mm x 27mm / 7”x4.3”x1.1” (L x W x H) Weight 25g 430g 430g Model Name CV-715 SP-5018   Package Contents 1x CV-715 1x SP-5018 1x 5V power adapter 1 x User Manual   Video Bandwidth 1.65Gbps 1.65Gbps   Input 1x RJ45 1x HDMI   Output 1x HDMI 1x HDMI, 8x RJ45   Power 5V DC 5V DC   HDMI Connector 19 pin type female connector 19 pin type female connector   RJ-45 Connector 2 indication LEDs 2 indication LEDs   Dimensions 87mm x 60mm x 25mm / 3.4”x2.4”x1” (L x W x H) 438mm x 158 x 45mm / 17.2”x6.2”x1.8” (L x W x H)   Weight 160g 1900g     WARRANTY   l   We provide 12-month limited warranty (exchange or repair) for defective items.   RETURN POLICY l   If the product arrives non-functional or defective, please contact us within 3 days for an exchange and we will send you a BRAND NEW replacement. l   The returned item must be in its original packaging with all documentation and accessories. Any dismantled, marked, or visibly defaced product by the buyer will VOID the item's return authorization.             Place a Bid!